Loading...
TiRant ULTRA HotSwap™ Quick-Release RAZOR Blade Holder – BLEMISH R&D 40% OFF SALE, PLEASE READ – (Jet-Black & Contoured 6AL-4V Titanium) With Curved Choil Micro-Jimping
WARNING: This quick release holder item is BLEMISHED / Slightly problematic in regards to functionality of some hard-use cutting tasks due to a design mistake on my part. We are discounting them 40% WHILE SUPPLIES LAST because they are totally usable for nearly all less-heavy intensive tasks. These are sold AS-IS with NO warranty. They will be priced normally at $35, but we are selling these for just $17 to fund the next V2 round.
THE BLEMISH / PROBLEM: All razor blades fit perfect in this holder, however when using SOME shorter length blades, if your blade gets stuck in something, and you try to pull UP, instead of straight out, the blade can dislodge from the holder. HOWEVER, when using it for most cutting activities like boxes, tape etc... I don't have any issues and over the past week, the only time it dislodged on me is when I stabbed it into a chink of wood and pulled it out and the lock failed. Due to this I cannot sell it for anything more than basically our cost. I tried to expose too much blade in my design I think and for a quick release you need a little more. This will be the slimmest version I sell, because the V2 quick release had to reduce some blade exposure to solve the issue of blades dislodging when the razor gets stuck and you pull up. Basically if you are only cutting down and pull-cuts, you won't have an issue. This blade holder is VERY cool and has an anti-rattle device built in that presses against the razor blade to ensure it won't rattle or move much even with a wide variety of cuts.
*PLEASE READ: Please know that this holder should work fine under normal cutting circumstances, but there MAY be times when you have to re-lock the blade in place. ALWAYS make sure the blades are fully shaped in and locked BEFORE using. Please purchase and only use AS-IS and at your own risk! Some also may exhibit some misalignment in there micro-jimping chill area if you buy one of those models.
Once these are gone, we won't be selling a holder that looks quite this slim, all parts except for the button are GR5 Titanium and priced 40% off at $17 dollars each with no choil + jimping and $20 with micro-milled jimping.
$17.00
This item has extended lead time of 2-3 weeks and will be shipped WITH ULTRA orders, your order will be treated as a pre-order please give us up to 3 weeks to prepare and finish building your knife to order.
We know you will love this knife, but If you are not 100% satisfied within 30-days, return it without any questions asked!
The TiRant ULTRA "Changes Everything"
I started designing the ULTRA around 2 years ago, but after nearly 20 samples, we finally were able to perfect the initial design and the results are truly amazing! — Not only does this knife look incredible, but versatile functionality rivals all other EDC knives on the market and it functions flawlessly. I am beyond excited to get the ULTRA in your hand so you can see just how amazing it really is. I designed the ULTRA to become the most versatile replacement blade knife the world has ever seen and I believe we've accomplished just that — Say goodbye to boring or traditional knives and say hello to a knife that can morph to nearly anything you throw at it. You'll also kiss blade-tip anxiety goodbye, because you can just swap your blade out IN SECONDS without batting an eye, because they only cost just $8.50!
We have over 28+ different razor blade holders and true full edge blades so you already have more options than any other blade replacement knife on the market to date! To top things off we have even more options coming in the future, so your knife will all ways be adapting to the new creations we come up with! (We also welcome your feedback if you have creative ideas)
Brace yourself because the ultra is a knife that I believe changes the entire game for EDC. You will never look at another knife the same after using the ULTRA — This truly chances everything!
Be sure to read all the details below, you won't to miss all the exciting features!
- The Ultimate Titanium Framelock EDC utility knife is here!
- 6AL-4V Grade-5 Titanium Smooth Titanium handles with countered geometric thumb-stud relief as well as 3 all-new dual-sided ELITE SERIES milled designs ALL available in either DarkRock stonewashed Titanium, or optional DLC jet-black.
- Hardened Stainless Blade Holder Included In Knife Each purchase will include our fixed-razor blade holder with no extra charge installed in the knife with 1X razor blade.
- Designed, Inspected and assembled in the US with parts made in CN & USA.
- Ultra smooth operation gliding on brass caged black ceramic bearings or optional SKIFF bearings if chosen. (SKIFF bearings make this knife feel even more incredible)
- OPTIONAL Full Back Spacer Customization +$25 starting out for smooth stonewashed full back spacer (You will receive your original one as well) We also have other styles and colors available for a different uncharge including centurion bronze with clip matching and frag-edition premium back spacer that will run around $35-45 depending on color.
- Custom micro-jimping for flipper tab included on ALL ULTRA models shipped in this pre-order — I believe the jumping on these turned out too good, I have handled a LOT of premium knives and have never felt a flipper tap with action that I like better than the ULTRA. I believe we NAILED the jimping on this one!
- CNC’D 6AL-4V Titanium Deep-Carry Clip — reversible for LH or RH carry attached to a custom rear spacer that meets perfectly with the blade when closed.
- Ceramic Detent replaceable Ball for smoother operation and longevity.
- Replacable dual-screw mounted lock-bar insert with included extended-length +.01mm lockbar insert for future peace of mind. Grind this down to the perfect locking position after a lifetime of use if needed.
- Smooth One-Handed Flipper Deployment Operation with solid lockup and perfect action.
- Custom geometric thumb stud — doubles as the triple-locking cam for the patent-pending HotSwap blade holder design.
- Each knife comes with a LOT of extra parts and hardware along with the some of the most premium packaging we have ever designed or created! The soft-touch black packaging with gloss lettering is nothing short of incredible touch, feel and shows just how dedicated to giving you more value than you could get anywhere else.
- I believe this is one of the biggest game changers in the knife world!
- Scales: 6AL-4V Grade 5 Titanium Contoured, Skeletonized and Lightened Handles.
- Blade Steel: Most blade replacements come in a tempered HRC 60-61 D2 steel, however we have plans for M390 variants and many more! Blade holders are either Hardened Stainless or GR5 Titanium.
- HotSwap Blade Holder: Hardened Stainless Steel to withstand high-stress that Titanium may not handle for this part specifically.
- Rear Spacer: 6AL-4V Grade 5 Titanium Alloy
- Deep-Carry Clip: 6AL-4V Grade 5 Titanium Alloy reversible deep-carry pocket clip for RH/LH carry.
- Screws: High-Grade tempered Stainless screws for longevity. Your tools will almost certainly break before the screes do, but make sure your T6/T6 has sharp edges before attempting any disassembly etc.
- Box: Hight-grade foam EVA in magnetic closable cardboard box with soft-touch and UV coated gloss-logo cover black on black.
- 1X — Fully Assembled TiRant ULTRA
- 1X — Spare T8 Center Collar Screw (Captive)
- 1X — Spare Center Pivot
- 1X — Spare Stop Pin
- 1X — Spare Rear Spacer Pin (Captive)
- 1X — Spare Rear Spacer Pin Screw
- 1X — Spare Clip Screw
- 1X — Custom over-sized lockbar insert with ceramic detent
- 5X — T6 Screw Replacements
- 1X — Exceed Designs PRO S2 Metal T6/T8 Torx Tool
- 1X — Box Cover in soft touch Black & White
- Other add-ons can be added at a discount when purchased together:
- +$25+ — Full Back spacer giving the knife an “integral-like” vibe.
- +$19 — SKIFF Bearings Add-On to make your knife feel like it’s absolutely riding on BUTTER!
- +$8 — Swap your clip to our mini clip (Tighter holding onto pants etc, keep longer clip if you desire less “hold” power)
- +$10 — Black PVD Vapor Deposition Coating
- +$15 — Black PVD 11-Piece Screw Kit (Available Now)
- +$? — Other customizations and modifications seen in shop and LOTS more coming!
- 3.3oz — Current Total Weight
- 0.98″ — Max Handle Height is .88 but gets smaller to around .88 later in there handle.
- 0.85-1.0″ — Handle Width from lower dimension to upper position of the handle
- 4.15″ — Handle Length
- 2.95″ — Max blade length (When using FULL razor or Sheepsfoot HTS Insert)
- 7.15″ — In Fully Open Position
- 2.00″ — Deep-Carry Clip (Optional Purchase: 1.70″ Deep-Carry MINI Clip)
- *Please check the image outlining each dimension for easier reference.
Made in China/USA depending on the part. We are attempting to move all; production to USA, but this ULTRA is extremely challenging due to the parts needed to make it function. In the future we plan on utilizing a similar hybrid manufacturing approach to our TiRant RAZOR V3 where many of our custom CNC’d scales are milled in ND, USA. Please contact us if you have any more specific questions or concerns. We are doing our best to keep this product affordable and accessible for everyone while supporting the US job market. Outsourced parts from various countries and USA assembly is required at this time.
- The Ultimate Titanium Framelock EDC utility knife is here!
- Swap your blades in seconds, choose from 28+ different designs — This truly changes the game forever for EDC knives and I believe you’ll see what I mean the moment this knife makes it into your hand!
- 6AL-4V Grade-5 Titanium Smooth Titanium handles with countered geometric thumb-stud relief as well as 3 all-new dual-sided ELITE SERIES milled designs ALL available in either DarkRock stonewashed Titanium, or optional DLC jet-black.
- Hardened Stainless Blade Holder Included In Knife Each purchase will include our fixed-razor blade holder with no extra charge installed in the knife with 1X razor blade.
- Designed, Inspected and assembled in the US with parts made in CN & USA.
- Ultra smooth operation gliding on brass caged black ceramic bearings or optional SKIFF bearings if chosen. (SKIFF bearings make this knife feel even more incredible)
- OPTIONAL Full Back Spacer Customization +$25 starting out for smooth stonewashed full back spacer (You will receive your original one as well) We also have other styles and colors available for a different uncharge including centurion bronze with clip matching and frag-edition premium back spacer that will run around $35-45 depending on color.
- Custom micro-jimping for flipper tab included on ALL ULTRA models shipped in this pre-order — I believe the jumping on these turned out too good, I have handled a LOT of premium knives and have never felt a flipper tap with action that I like better than the ULTRA. I believe we NAILED the jimping on this one!
- CNC’D 6AL-4V Titanium Deep-Carry Clip — reversible for LH or RH carry attached to a custom rear spacer that meets perfectly with the blade when closed.
- Ceramic Detent replaceable Ball for smoother operation and longevity.
- Replacable dual-screw mounted lock-bar insert with included extended-length +.01mm lockbar insert for future peace of mind. Grind this down to the perfect locking position after a lifetime of use if needed.
- Smooth One-Handed Flipper Deployment Operation with solid lockup and perfect action.
- Custom geometric thumb stud — doubles as the triple-locking cam for the patent-pending HotSwap blade holder design.
- Each knife comes with a LOT of extra parts and hardware along with the some of the most premium packaging we have ever designed or created! The soft-touch black packaging with gloss lettering is nothing short of incredible touch, feel and shows just how dedicated to giving you more value than you could get anywhere else.
- Scales: 6AL-4V Grade 5 Titanium Contoured, Skeletonized and Lightened Handles.
- Blade Steel: Most blade replacements come in a tempered HRC 60-61 D2 steel, however we have plans for M390 variants and many more! Blade holders are either Hardened Stainless or GR5 Titanium.
- HotSwap Blade Holder: Hardened Stainless Steel to withstand high-stress that Titanium may not handle for this part specifically.
- Rear Spacer: 6AL-4V Grade 5 Titanium Alloy
- Deep-Carry Clip: 6AL-4V Grade 5 Titanium Alloy reversible deep-carry pocket clip for RH/LH carry.
- Screws: High-Grade tempered Stainless screws for longevity. Your tools will almost certainly break before the screes do, but make sure your T6/T6 has sharp edges before attempting any disassembly etc.
- Box: Hight-grade foam EVA in magnetic closable cardboard box with soft-touch and UV coated gloss-logo cover black on black.
- 1X — Fully Assembled TiRant ULTRA
- 1X — Spare T8 Center Collar Screw (Captive)
- 1X — Spare Center Pivot
- 1X — Spare Stop Pin
- 1X — Spare Rear Spacer Pin (Captive)
- 1X — Spare Rear Spacer Pin Screw
- 1X — Spare Clip Screw
- 1X — Custom over-sized lockbar insert with ceramic detent
- 5X — T6 Screw Replacements
- 1X — Exceed Designs PRO S2 Metal T6/T8 Torx Tool
- 1X — Box Cover in soft touch Black & White
- Other add-ons can be added at a discount when purchased together:
- +$25+ — Full Back spacer giving the knife an “integral-like” vibe.
- +$19 — SKIFF Bearings Add-On to make your knife feel like it’s absolutely riding on BUTTER!
- +$8 — Swap your clip to our mini clip (Tighter holding onto pants etc, keep longer clip if you desire less “hold” power)
- +$10 — Black PVD Vapor Deposition Coating
- +$15 — Black PVD 11-Piece Screw Kit (Available Now)
- +$? — Other customizations and modifications seen in shop and LOTS more coming!
- 3.3oz — Current Total Weight
- 0.98″ — Max Handle Height is .88 but gets smaller to around .88 later in there handle.
- 0.85-1.0″ — Handle Width from lower dimension to upper position of the handle
- 4.15″ — Handle Length
- 2.95″ — Max blade length (When using FULL razor or Sheepsfoot HTS Insert)
- 7.15″ — In Fully Open Position
- 2.00″ — Deep-Carry Clip (Optional Purchase: 1.70″ Deep-Carry MINI Clip)
- *Please check the image outlining each dimension for easier reference.
Made in China/USA depending on the part. We are attempting to move all; production to USA, but this ULTRA is extremely challenging due to the parts needed to make it function. In the future we plan on utilizing a similar hybrid manufacturing approach to our TiRant RAZOR V3 where many of our custom CNC’d scales are milled in ND, USA. Please contact us if you have any more specific questions or concerns. We are doing our best to keep this product affordable and accessible for everyone while supporting the US job market. Outsourced parts from various countries and USA assembly is required at this time.
Have more questions? Please contact us!
